Manual & Training
Roller Wax
STEP 1
Insert a cartridge (with roller head attached) into each heating compartment,close the lid, turn the dial to 6 and leave until the indicator light goes out, switch the dial to 4 or 5 for approx. 10mins, this allows the wax to reach the correct working temperature. The system is now ready to use.
STEP 2
Cleanse the area to be treated using Renee Pre Wax Treatment Spray, removing all make up, body lotions, moisturisers or surface grease.
* Dry thoroughly.
STEP 3
Remove chosen cartridge from the heater and turn upside down,allowing the wax to flow into the roller head. Cover the cartridge with a
disposable protective sleeve (the cartridges can become very hot to touch).
DO NOT SQUEEZE.
STEP 4
Holding the cartridge at approx. 45° degree angle, apply the wax with the direction of hair growth. Roll the cartridge quite quickly over the skin,
ensuring an even and thin application. Cover as much of the entire area to be treated a possible, (preventing overlapping and encouraging speed).Insert the cartridge into the heating compartment to maintain the temperature.
STEP 5
Using a fabric/paper strip remove the wax, (when treating the legs always begin at the ankle) until the area is clear.
STEP 6
When treating the back of the legs use the cartridge in the same manner,remembering to follow the direction of the hair growth, and remove.
STEP 7
Apply Renee Wax Control, which with the natural calming and soothing effects of Azulene and a unique blend of oils enriched with vitamins, helps soothe the irritated skin. The oil base gently dissolves any remaining wax from the treatment area.
STEP 8
Enhance the completion of the treatment with the application of Renee Cool Down After Wax Treatment. This unique cream formula has been developed to reduce redness caused by the treatment. The natural soothing and disinfecting ingredients of Camphor, Menthol and Clove oil leave the skin feeling comfortable, cool and refreshed.
*When used after Renee Wax Control it will absorb any residual oils.*
STEP 9
Use the mini roller head when performing an eyebrow wax. As with spatula applied waxing, cover the remaining brow with petroleum jelly for protection. Holding the cartridge at a 45°degree angle, gently roll the wheel over the hairs to be removed. Apply a fabric/paper strip, support and remove.
*Insert cartridges back into heating compartment, close the lid.*
STEP 10
The mini roller head has also been designed to perform the ideal lip wax treatment.
STEP 11
When treating the underarm area, therapist preference will determine the size of the roller head required. Underarm hair growth can occur in many pattern variations and the size of the head used can vary from client to client.
STEP 12
Upon completion of the treatment the therapist can choose either to clean the roller heads or dispose of them. To clean use a wax equipment cleaner wipe and clean the roller head or alternatively place the heads in a bowl of wax equipment cleaner and leave to soak.